Clicky

Best Chainsaw For Milling Lumber – Your Ultimate Guide For 2019

There are many fantastic chainsaws available on the market today, but how can you decide which one of these tools is best for you? Chainsaws are most commonly used for cutting down trees and chopping lumber into firewood. Keeping your specific needs in mind will allow you to choose the top tool for the job you need.

Best Chainsaw for Milling Lumber

#1. Husqvarna 460 Rancher, 24 in. 60.3cc 2-Cycle Gas Best Chainsaw

 This chainsaw is an excellent all-around tool with a wide spectrum of design features that enhance its overall comfort and usability. From the get-go, you’ll notice the smart start technology, which allows you to fire it up using a simple switch. As a result, you’ll waste no time or effort with a stubborn pull motor when using this tool. It’s LowVib design also works to minimize vibration during operation in order to prevent user grip fatigue.

During use, X-Torq technology minimizes emissions by allowing for reduced fuel consumption. The Husqvarna 460 Rancher also utilizes a centrifugal air-cleaning system in order to preemptively divert larger pieces of debris from entering the filter in order to reduce the need for air filter maintenance. In the infrequent event that you do need to service your filter, the quick-release design makes cleaning and/or replacing it a snap.

Finally, the adjustable oil pump will benefit both your wallet and the environment by adapting the oil flow to how you’re using the tool, as well as the current weather conditions. This way, the amount of oil used is minimized and you can save on buying oil, while simultaneously reducing your carbon footprint. All things considered, this chainsaw has a lot of great features worth noting. And it comes at a reasonable price.

CHECK PRICE ON AMAZON

Pros
  • Reduced emissions and oil consumption thanks to X-Torq technology and the adjustable fuel pump
  • Air-cleaning system designed to reduce the need for frequent maintenance
  • Easy start at the touch of a switch
  • Designed to lower vibrations for minimal operator hand fatigue
Cons
  • Slightly heavier than the average chainsaw and may not be ideal for shorter users or those who would fatigue quickly when using a heavy machine
  • Some users have reported minor leakage from the chain oiler during storage

#2. Husqvarna 455, 20 in. 55.5cc 2-Cycle Gas Good Milling Chainsaw

Husqvarna 455, 20 in. 55.5cc 2-Cycle Gas Chainsaw

The Husqvarna 455 is a rancher chainsaw intended for moderate to larger jobs. Smart start technology allows you to turn it on with only the slightest amount of effort, thus saving time in comparison to using a demanding pull cord. It is also designed to consume fuel ergonomically using X-Torq technology, and this also results in lower emissions in order to comply with strict global environmental regulations. This goes a long way toward saving users’ money on the cost of fuel while also helping the planet.

Additionally, LowVib technology cuts down on the intensity of vibrations during use, thus allowing operators to maintain their grip and not be burdened with hand/arm fatigue, which might otherwise result in the need for constant breaks. It also has a centrifugal air-cleaning system that prevents larger bits of dust and debris from ever reaching the filter. As a result, the frequency of air filter cleanings and replacements is drastically reduced when compared to a saw without this technology.

All in all, the Husqvarna 455 Rancher is the perfect tool for users who require a powerful, durable and easy-to-use saw that can be used in a variety of conditions. It’s raw power combined with cutting-edge technology, and it’s streamlined design make it an excellent choice.

CHECK PRICE ON AMAZON

Pros
  • Reduced emissions thanks to X-Torq technology
  • Easy start makes turning it on nearly effortless
  • Designed to lower vibrations for minimal operator hand fatigue
  • Tool-less chain tensioning makes adjusting the chain tension and assembling the bar and chain easier processes
Cons
  • Slightly heavier than the average chainsaw, and may not be ideal for shorter users or those who would fatigue quickly when using a heavy machine
  • The 20” bar is not suitable for extremely heavy duty cutting

#3. Poulan Pro PR5020 20 in. 50cc 2-Cycle Chainsaw Milling

Poulan Pro 20 in. 50cc 2-Cycle Gas Chainsaw, PR5020

This Poulan gas-powered chainsaw is a powerhouse with a modern, streamlined design that can take on moderate to large-sized lumber with ease. It all starts with the Effortless Pull-Start System (EPS), which provides noticeable assistance to the operator when using the pull cord. Not only does it make starting the saw 30% easier, but it also minimizes wear on the tool itself. This tool is powered by an OxyPower engine, which covers all the bases by providing tons of power, reducing carbon emissions by up to 70%, and optimizing fuel use.

Another feature that enhances the reliability of this tool is the purge bulb. It provides the carburetor with fuel in order to protect the saw, to reduce any risk of damage, and to make it much easier to turn on. During use, you’ll find that the choke/stop control allows the machine to transition smoother between use and non-use, and this lessens the possibility of engine flooding. It also has a combi tool conveniently stored in the rear handle for on-the-way maintenance and any time.

This chainsaw is well-equipped to do it all, from felling trees to cutting firewood. It’s powerful, efficient, and modern design makes it an excellent choice for landscapers and property owners alike.

CHECK PRICE ON AMAZON

Pros
  • Powerful OxyPower engine allows the saw to put out high volumes of work while reducing carbon emissions and optimizing fuel consumption
  • Effortless Pull System (EPS) makes starting this saw easy, despite the fact that it uses a pull cord
  • The purge bulb provides the carburetor with fuel, thus minimizing chances for damage
Cons
  • The OEM spur sprocket is the only kind supported by this saw, so you can’t upgrade to a different one
  • Being a gas-powered chainsaw, it isn’t nearly as portable or mobile as an electrical model

 Chainsaw Lumber Cutting Guide

Once you’ve selected the ideal chainsaw to complete the kind of lumber cutting tasks that you need to get done, it’s crucial to know exactly how to use it. Cutting lumber may seem like an utterly simple undertaking, but safety and proper technique are key factors to bear in mind, especially if you have little to no experience with it. Read on to learn how to properly cut lumber using your chainsaw to achieve the same quality as a good mill.

Safety first — Due to the fact that a chainsaw is such a dangerous tool with the ability to inflict serious harm, you should always account for certain safety measures before and during use. This starts with how you dress; be sure to use some form of eye protection, ear protection, durable boots, long clothing which covers your limbs completely, and proper chainsaw pants, especially if you intend to cut down a tree. Specifically, chainsaw pants are imperative, as they provide a layer of protection that could prevent a very serious accident.

Survey your worksite — Give the area where you intend to work a once-over to ensure that there are no visible risks. This includes predicting the likelihood of getting the tree to fall in the intended direction, possible outcomes if it should fall elsewhere, the current strength and direction of the wind, etc. Safely operating a chainsaw is difficult enough, and being aware of your surroundings can only help.

Getting to work — Starting from the ground, engage the chain brake and be sure that the choke is closed. Now, grip the handle using your left hand and place your right foot within the start trigger area in order to secure the saw on the ground. Now you can safely pull the start cord in order to start the machine. From there, release the choke, pull the rope again, and you’ll be ready to go. On some saws, you may also need to prime the engine prior to starting.

Handling your chainsaw — Always be aware of your footing and watch for any potential hazards during operation. Never cut at the tip of the bar, as this may result in kickback. Also, it’s recommended to never cut above shoulder height, as experiencing kickback from this position is especially dangerous. Others should always stay at least 15 ft. away from you during use, and even farther if you plan to fell a tree.

Chainsaws For Milling – Conclusion

Choosing the best chainsaw for milling lumber needs will allow you to get the most out of your new tool. Remember to always dress appropriately for the task of operating any kind of high-risk machinery such as this, as it will significantly reduce the chance of a serious accident.